- 您现在的位置：买卖IC网 > Sheet目录840 > B62152A001X001 (EPCOS Inc)FERRITE DBL APERTURE CORE 14.5MM
Ferrites and accessories
Cautions and warnings
Mechanical stress and mounting
Ferrite cores have to meet mechanical requirements during assembling and for a growing number
of applications. Since ferrites are ceramic materials one has to be aware of the special behavior
under mechanical load.
As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing
or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic loads
can cause cracks or failure of the ferrite cores.
For detailed information see Data Book 2007, chapter “General – Definitions, 8.1”.
Effects of core combination on A L value
Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent
that the initial permeability is dependent on the stress state of the core. The higher the stresses are
in the core, the lower is the value for the initial permeability. Thus the embedding medium should
have the greatest possible elasticity.
For detailed information see Data Book 2007, chapter “General – Definitions, 8.2”.
Heating up
Ferrites can run hot during operation at higher flux densities and higher frequencies.
NiZn-materials
The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.
Processing notes
– The start of the winding process should be soft. Else the flanges may be destroid.
– To strong winding forces may blast the flanges or squeeze the tube that the cores can no more
be mount.
– To long soldering time at high temperature (>300 °C) may effect coplanarity or pin arrangement.
– Not following the processing notes for soldering of the J-leg terminals may cause solderability
problems at the transformer because of pollution with Sn oxyd of the tin bath or burned insulation
of the wire. For detailed information see Data Book 2007, chapter “Processing notes, 2.2”.
– The dimensions of the hole arrangement have fixed values and should be understood as a
recommendation for drilling the printed circuit board. For dimensioning the pins, the group of
holes can only be seen under certain conditions, as they fit into the given hole arrangement. To
avoid problems when mounting the transformer, the manufacturing tolerances for positioning the
customers’ drilling process must be considered by increasing the hole diameter.
3
09/06
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
B64290L0038X038
FERRITE TOROID 10MM OD
B64290L0040X830
FERRITE TOROID 58.3MM OD
B64290L0044X038
FERRITE TOROID 12.5MM OD
B64290L0082X830
FERRITE TOROID 50MM OD
B64290L0084X087
FERRITE TOROID 102MM OD
B64290L0618X035
FERRITE TOROID 25.3MM OD
B64290L0632X830
FERRITE TOROID 20MM OD
B64290L0638X087
FERRITE TOROID 22.1MM OD
相关代理商/技术参数
B62152A0027X001
制造商:EPCOS 制造商全称:EPCOS 功能描述:Ferrites and accessories
B62152A0027X013
功能描述:EMI/RFI 抑制器及铁氧体 3.6/2.1/2.0 DOUBLE-APERTURE CORE
RoHS:否 制造商:Fair-Rite 产品:Ferrite Cores 阻抗:365 Ohms 容差: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 封装 / 箱体: 端接类型:SMD/SMT
B62152A0027X030
功能描述:EMI/RFI 抑制器及铁氧体 2.0/3.6/2.1 DOUBLE-APERTURE CORE
RoHS:否 制造商:Fair-Rite 产品:Ferrite Cores 阻抗:365 Ohms 容差: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 封装 / 箱体: 端接类型:SMD/SMT
B62152A0028X030
功能描述:EMI/RFI 抑制器及铁氧体 3.0/3.6/2.1 DOUBLE-APERTURE CORE
RoHS:否 制造商:Fair-Rite 产品:Ferrite Cores 阻抗:365 Ohms 容差: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 封装 / 箱体: 端接类型:SMD/SMT
B62152A15X30
制造商:TDK Epcos 功能描述:FERRITE CORES
B62152A1X1
制造商:TDK-EPC 功能描述:Ferrite Core Double-Aperture Core 14.5mm 8.5mm 14.5mm Broadband Transformers 制造商:EPCOS 功能描述:Bulk 制造商:TDK-EPC 功能描述:Double-aperture core K1 330nH 制造商:TDK-EPC 功能描述:Dual aperture core,330nH 14.5mm L
B62152-A1-X1
制造商:EPCOS 制造商全称:EPCOS 功能描述:Double-Aperture Cores
B62152A1X1T1
功能描述:EMI/RFI 抑制器及铁氧体 DOUBLE-APERT 14.5/8.5/14.5
RoHS:否 制造商:Fair-Rite 产品:Ferrite Cores 阻抗:365 Ohms 容差: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 封装 / 箱体: 端接类型:SMD/SMT